Insert EM 9 PEE for HSM + WSM, for rails 10 mm, 140 x 29,5 x 30 mm, ETN-HM-1000-E, surface resistivity 10^7 W (DIN IEC 60093). The friction of moving parts may cause big differences of potential. Arising voltage punctures might lead to an ignition of flammable substances. This could cause serious consequences in explosion-proof areas (e.g. chemical, mining, paint industry). To protect against electrostatic discharges (ESD), rapid discharges should be avoided. Below listed materials are conform to the protection category „conductive“ (surface resistance between 100 Ohm and 100 kOhm) and „static dissipating“ (surface resistance between 100 kOhm and 100 GOhm). Guide inserts out of ETN®-HM -1000-E have antistatic agents and are characterized by a special surface resistance of about 107 Ohm (DIN IEC 60093). Therefore the material is electrically conductive and does not pick up static charging.

309007-E
Art.-Nr.: 309007-E

Insert EM 9 PEE for HSM + WSM, for rails 10 mm, 140 x 29,5 x 30 mm, ETN-HM-1000-E, surface resistivity 10^7 W (DIN IEC 60093). The friction of moving parts may cause big differences of potential. Arising voltage punctures might lead to an ignition of flammable substances. This could cause serious consequences in explosion-proof areas (e.g. chemical, mining, paint industry). To protect against electrostatic discharges (ESD), rapid discharges should be avoided. Below listed materials are conform to the protection category „conductive“ (surface resistance between 100 Ohm and 100 kOhm) and „static dissipating“ (surface resistance between 100 kOhm and 100 GOhm). Guide inserts out of ETN®-HM -1000-E have antistatic agents and are characterized by a special surface resistance of about 107 Ohm (DIN IEC 60093). Therefore the material is electrically conductive and does not pick up static charging.

  • 309007-E Stokta!
    • Teknik Detaylar

      İmalatçı: ETN
      Malzeme: PEE (Poliethilen ETN®-HM-1000-E) antistatik
      Paten Plastiği - Genişlik: 29,5 mm
      Paten Plastiği - Yükseklik: 30 mm
      Paten Plastiği - Uzunluk: 140 mm
      Paten için uygun: HSM 140 (Art.-Nr.: 300002)
      WSM 140 (Art.-Nr.: 300003)
      Ray genişliği: 9 mm
    Insert EM 9 PEE for HSM + WSM, for rails 10 mm, 140 x 29,5 x 30 mm, ETN-HM-1000-E, surface... daha fazla
    "Insert EM 9 PEE for HSM + WSM, for rails 10 mm, 140 x 29,5 x 30 mm, ETN-HM-1000-E, surface resistivity 10^7 W (DIN IEC 60093). The friction of moving parts may cause big differences of potential. Arising voltage punctures might lead to an ignition of flammable substances. This could cause serious consequences in explosion-proof areas (e.g. chemical, mining, paint industry). To protect against electrostatic discharges (ESD), rapid discharges should be avoided. Below listed materials are conform to the protection category „conductive“ (surface resistance between 100 Ohm and 100 kOhm) and „static dissipating“ (surface resistance between 100 kOhm and 100 GOhm). Guide inserts out of ETN®-HM -1000-E have antistatic agents and are characterized by a special surface resistance of about 107 Ohm (DIN IEC 60093). Therefore the material is electrically conductive and does not pick up static charging."

    Insert EM 9 PEE for HSM + WSM, for rails 10 mm, 140 x 29,5 x 30 mm, ETN-HM-1000-E, surface resistivity 10^7 W (DIN IEC 60093).

    The friction of moving parts may cause big differences of potential. Arising voltage punctures might lead to an ignition of flammable substances. This could cause serious consequences in explosion-proof areas (e.g. chemical, mining, paint industry). To protect against electrostatic discharges (ESD), rapid discharges should be avoided. Below listed materials are conform to the protection category „conductive“ (surface resistance between 100 Ohm and 100 kOhm) and
    „static dissipating“ (surface resistance between 100 kOhm and 100 GOhm).

    Guide inserts out of ETN®-HM -1000-E have antistatic agents
    and are characterized by a special surface resistance of
    about 107 Ohm (DIN IEC 60093). Therefore the material is electrically
    conductive and does not pick up static charging.

    TOP!
    Sabit Paten HSM 140. EM 5-20 mm Paten Plastigi...
    Art.-Nr.: 300002
    Üreticiler için uygun: ETN
    TOP!
    Sabit Paten WSM 140 , EM+EMU 5-20 mm Paten...
    Art.-Nr.: 300003
    Üreticiler için uygun: ETN
    Döküm Paten HSM-GG 140,Siyah, EM 5-20 mm Tipi...
    Art.-Nr.: 300079
    Üreticiler için uygun: ETN