EX-ProdukteETN® Autor Markus Weber erklärt uns die Besonderheiten unserer EX-geschützen Produkte für den Aufzug/Fahrstuhl Bereich. Wo sollte man Explosionsge...

Sabit Paten HSML 180, EL 9-28 mm Paten Plastigi Için, 180 x 120 x 65 mm

Ürün numarası: 300004

Sabit Paten WSML 180, EL 9-28 mm Paten Plastigi Için Uygun,180 x 120 x 164 mm

Ürün numarası: 300011

Döküm Paten HSMLS 180, EL 9 - 28 mm Paten Plastigi Için, 180 x 120 x 65 mm, DDK 40

Ürün numarası: 300078

Insert EL 16 PEE for guide holder HSML + WSML, rail width 16mm, 180 x 36,5 x 50 mm,, foldable, ETN-HM-1000-E, surface resistivity 10^7 W (DIN IEC 60093). The friction of moving parts may cause b...

Basmak

Ürün numarası: 309014-E

Hemen hazır

Teknik Detaylar

Ayakkabı tutmak için uygun:	HSML 180 (Art.-Nr.: 300004), HSMLS (GG) 180 (Art.-Nr.: 300078), WSML 180 (Art.-Nr.: 300011)
Imalatçıyla aynı yapıda:	ETN
Materyal:	PEE (Poliethilen ETN®-HM-1000-E) antistatik
Mevduat yüksekliği:	30 mm
Ray genişliği:	16 mm
Taban astarı uzunluğu:	180 mm
Uç genişliği:	36,5 mm

Açıklama

Insert EL 16 PEE for guide holder HSML + WSML, rail width 16mm, 180 x 36,5 x 50 mm,, foldable, ETN-HM-1000-E, surface resistivity 10^7 W (DIN IEC 60093).

The friction of moving parts may cause big differences of potential. Arising voltage punctures might lead to an ignition of flammable substances. This could cause serious consequences in explosion-proof areas (e.g. chemical, mining, paint industry). To protect against electrostatic discharges (ESD), rapid discharges should be avoided. Below listed materials are conform to the protection category „conductive“ (surface resistance between 100 Ohm and 100 kOhm) and
„static dissipating“ (surface resistance between 100 kOhm and 100 GOhm).

Guide inserts out of ETN®-HM -1000-E have antistatic agents
and are characterized by a special surface resistance of
about 107 Ohm (DIN IEC 60093). Therefore the material is electrically
conductive and does not pick up static charging.