Insert ELN 16 PEE for HSMLN + WSMLN, for rail 16 mm, 180 x 29,5 x 30 mm, ETN-HM-1000-E, surface resistivity 10^7 W (DIN IEC 60093). The friction of moving parts may cause big differences of potential. Arising voltage punctures might lead to an ignition of flammable substances. This could cause serious consequences in explosion-proof areas (e.g. chemical, mining, paint industry). To protect against electrostatic discharges (ESD), rapid discharges should be avoided. Below listed materials are conform to the protection category „conductive“ (surface resistance between 100 Ohm and 100 kOhm) and „static dissipating“ (surface resistance between 100 kOhm and 100 GOhm). Guide inserts out of ETN®-HM -1000-E have antistatic agents and are characterized by a special surface resistance of about 107 Ohm (DIN IEC 60093). Therefore the material is electrically conductive and does not pick up static charging.

309216-E
Art.-Nr.: 309216-E

Insert ELN 16 PEE for HSMLN + WSMLN, for rail 16 mm, 180 x 29,5 x 30 mm, ETN-HM-1000-E, surface resistivity 10^7 W (DIN IEC 60093). The friction of moving parts may cause big differences of potential. Arising voltage punctures might lead to an ignition of flammable substances. This could cause serious consequences in explosion-proof areas (e.g. chemical, mining, paint industry). To protect against electrostatic discharges (ESD), rapid discharges should be avoided. Below listed materials are conform to the protection category „conductive“ (surface resistance between 100 Ohm and 100 kOhm) and „static dissipating“ (surface resistance between 100 kOhm and 100 GOhm). Guide inserts out of ETN®-HM -1000-E have antistatic agents and are characterized by a special surface resistance of about 107 Ohm (DIN IEC 60093). Therefore the material is electrically conductive and does not pick up static charging.

  • 309216-E ¡En inventario!
    • Datos Técnicos

      Idéntico al del fabricante: ETN
      Material: PEE (polietileno ETN®-HM-1000-E) con conductividad
      Inserto-Ancho: 29,5 mm
      Inserto-Alto: 30 mm
      Inserto-Largo: 180 mm
      Adecuado para soportes de zapata: HSMLN 180 (Art.-Nr.: 300010)
      WSMLN 180 (Art.-Nr.: 300005)
      Ancho de raíl: 16 mm
    Insert ELN 16 PEE for HSMLN + WSMLN, for rail 16 mm, 180 x 29,5 x 30 mm, ETN-HM-1000-E,...más
    "Insert ELN 16 PEE for HSMLN + WSMLN, for rail 16 mm, 180 x 29,5 x 30 mm, ETN-HM-1000-E, surface resistivity 10^7 W (DIN IEC 60093). The friction of moving parts may cause big differences of potential. Arising voltage punctures might lead to an ignition of flammable substances. This could cause serious consequences in explosion-proof areas (e.g. chemical, mining, paint industry). To protect against electrostatic discharges (ESD), rapid discharges should be avoided. Below listed materials are conform to the protection category „conductive“ (surface resistance between 100 Ohm and 100 kOhm) and „static dissipating“ (surface resistance between 100 kOhm and 100 GOhm). Guide inserts out of ETN®-HM -1000-E have antistatic agents and are characterized by a special surface resistance of about 107 Ohm (DIN IEC 60093). Therefore the material is electrically conductive and does not pick up static charging."

    Insert ELN 16 PEE for HSMLN + WSMLN, for rail 16 mm, 180 x 29,5 x 30 mm, ETN-HM-1000-E,
    surface resistivity 10^7 W (DIN IEC 60093).

    The friction of moving parts may cause big differences of potential. Arising voltage punctures might lead to an ignition of flammable substances. This could cause serious consequences in explosion-proof areas (e.g. chemical, mining, paint industry). To protect against electrostatic discharges (ESD), rapid discharges should be avoided. Below listed materials are conform to the protection category „conductive“ (surface resistance between 100 Ohm and 100 kOhm) and
    „static dissipating“ (surface resistance between 100 kOhm and 100 GOhm).

    Guide inserts out of ETN®-HM -1000-E have antistatic agents
    and are characterized by a special surface resistance of
    about 107 Ohm (DIN IEC 60093). Therefore the material is electrically
    conductive and does not pick up static charging.

    Soporte de zapata WSMLN 180, para inserto ELN 9...
    Art.-Nr.: 300005
    Adecuado para fabricantes: ETN
    TOP!
    Soporte de zapata HSMLN 180, para inserto ELN 9...
    Art.-Nr.: 300010
    Adecuado para fabricantes: ETN