EX-ProdukteETN® Autor Markus Weber erklärt uns die Besonderheiten unserer EX-geschützen Produkte für den Aufzug/Fahrstuhl Bereich. Wo sollte man Explosionsge...

Insert EEL 19 PEE for HSMEL + WSMEL, for rail 19 mm, 300 x 36,5 x 38 mm, ETN-HM-1000-E, surface resistivity 10^7 W (DIN IEC 60093). The friction of moving parts may cause big differences of pote...

Número de artículo: 313008-E

Disponible inmediatamente

Datos Técnicos

Adecuado para sujetar zapatos:	HSMEL (GG) 28,6 (Art.-Nr.: 300013), WSMEL 300 (Art.-Nr.: 300006)
Altura del deposito:	38 mm
Ancho de inserción:	36,5 mm
Ancho de riel:	19 mm
Idéntico en construcción al fabricante.:	ETN
Longitud de la plantilla:	300 mm
Material:	PEE (polietileno ETN®-HM-1000-E) con conductividad

Descripción

Insert EEL 19 PEE for HSMEL + WSMEL, for rail 19 mm, 300 x 36,5 x 38 mm, ETN-HM-1000-E, surface resistivity 10^7 W (DIN IEC 60093).

The friction of moving parts may cause big differences of potential. Arising voltage punctures might lead to an ignition of flammable substances. This could cause serious consequences in explosion-proof areas (e.g. chemical, mining, paint industry). To protect against electrostatic discharges (ESD), rapid discharges should be avoided. Below listed materials are conform to the protection category „conductive“ (surface resistance between 100 Ohm and 100 kOhm) and
„static dissipating“ (surface resistance between 100 kOhm and 100 GOhm).

Guide inserts out of ETN®-HM -1000-E have antistatic agents
and are characterized by a special surface resistance of
about 107 Ohm (DIN IEC 60093). Therefore the material is electrically
conductive and does not pick up static charging.

Datos Técnicos

Adecuado para sujetar zapatos:	HSMEL (GG) 28,6 (Art.-Nr.: 300013), WSMEL 300 (Art.-Nr.: 300006)
Altura del deposito:	38 mm
Ancho de inserción:	36,5 mm
Ancho de riel:	19 mm
Idéntico en construcción al fabricante.:	ETN
Longitud de la plantilla:	300 mm
Material:	PEE (polietileno ETN®-HM-1000-E) con conductividad