Insert EK 5 PEE for HSMK + WSMK, for rail 5 mm, 100 x 20 x 30 mm, ETN-HM-1000-E, surface resistivity 10^7 Ohm (DIN IEC 60093) The friction of moving parts may cause big differences of potential. Arising voltage punctures might lead to an ignition of flammable substances. This could cause serious consequences in explosion-proof areas (e.g. chemical, mining, paint industry). To protect against electrostatic discharges (ESD), rapid discharges should be avoided. Below listed materials are conform to the protection category „conductive“ (surface resistance between 100 Ohm and 100 kOhm) and „static dissipating“ (surface resistance between 100 kOhm and 100 GOhm). Guide inserts out of ETN®-HM -1000-E have antistatic agents and are characterized by a special surface resistance of about 10^7 Ohm (DIN IEC 60093). Therefore the material is electrically conductive and does not pick up static charging.

309002-E
Art.-Nr.: 309002-E

Insert EK 5 PEE for HSMK + WSMK, for rail 5 mm, 100 x 20 x 30 mm, ETN-HM-1000-E, surface resistivity 10^7 Ohm (DIN IEC 60093) The friction of moving parts may cause big differences of potential. Arising voltage punctures might lead to an ignition of flammable substances. This could cause serious consequences in explosion-proof areas (e.g. chemical, mining, paint industry). To protect against electrostatic discharges (ESD), rapid discharges should be avoided. Below listed materials are conform to the protection category „conductive“ (surface resistance between 100 Ohm and 100 kOhm) and „static dissipating“ (surface resistance between 100 kOhm and 100 GOhm). Guide inserts out of ETN®-HM -1000-E have antistatic agents and are characterized by a special surface resistance of about 10^7 Ohm (DIN IEC 60093). Therefore the material is electrically conductive and does not pick up static charging.

  • 309002-E ¡En inventario!
    • Datos Técnicos

      Idéntico al del fabricante: ETN
      Material: PEE (polietileno ETN®-HM-1000-E) con conductividad
      Inserto-Ancho: 20 mm
      Inserto-Alto: 30 mm
      Inserto-Largo: 100 mm
      Adecuado para soportes de zapata: HSMK 100 (Art.-Nr.: 300008)
      WSMK 100 (Art.-Nr.: 300001)
      Ancho de raíl: 5 mm
    Insert EK 5 PEE for HSMK + WSMK, for rail 5 mm, 100 x 20 x 30 mm, ETN-HM-1000-E, surface...más
    "Insert EK 5 PEE for HSMK + WSMK, for rail 5 mm, 100 x 20 x 30 mm, ETN-HM-1000-E, surface resistivity 10^7 Ohm (DIN IEC 60093) The friction of moving parts may cause big differences of potential. Arising voltage punctures might lead to an ignition of flammable substances. This could cause serious consequences in explosion-proof areas (e.g. chemical, mining, paint industry). To protect against electrostatic discharges (ESD), rapid discharges should be avoided. Below listed materials are conform to the protection category „conductive“ (surface resistance between 100 Ohm and 100 kOhm) and „static dissipating“ (surface resistance between 100 kOhm and 100 GOhm). Guide inserts out of ETN®-HM -1000-E have antistatic agents and are characterized by a special surface resistance of about 10^7 Ohm (DIN IEC 60093). Therefore the material is electrically conductive and does not pick up static charging."

    Insert EK 5 PEE for HSMK + WSMK, for rail 5 mm, 100 x 20 x 30 mm, ETN-HM-1000-E, surface resistivity 10^7 Ohm (DIN IEC 60093)

    The friction of moving parts may cause big differences of potential. Arising voltage punctures might lead to an ignition of flammable substances. This could cause serious consequences in explosion-proof areas (e.g. chemical, mining, paint industry). To protect against electrostatic discharges (ESD), rapid discharges should be avoided. Below listed materials are conform to the protection category „conductive“ (surface resistance between 100 Ohm and 100 kOhm) and
    „static dissipating“ (surface resistance between 100 kOhm and 100 GOhm).

    Guide inserts out of ETN®-HM -1000-E have antistatic agents
    and are characterized by a special surface resistance of
    about 10^7 Ohm (DIN IEC 60093). Therefore the material is electrically
    conductive and does not pick up static charging.

    TOP!
    Soporte de zapata WSMK 100, para inserto EK 5 -...
    Art.-Nr.: 300001
    Adecuado para fabricantes: ETN
    TOP!
    Soporte de zapata HSMK 100, para inserto EK 5 -...
    Art.-Nr.: 300008
    Adecuado para fabricantes: ETN