Spare parts for explosive atmospheres

Durch die Reibung bewegter Bauteile können große Potentialdifferenzen entstehen. Die entstehenden Spannungsdurchschläge können zur Zündung entzündlicher Stoffe führen. In explosionsgeschützten Bereichen (z.B. chemische Industrie, Bergbau, Farbherstellung) kann dies schwerwiegende Folgen haben. Ein möglicher Schutz vor elektrostatischen Entladungen (kurz ESD) besteht in der Vermeidung schneller Entladungen. Die nachfolgend aufgeführten Materialien entsprechen der Schutzkategorie „leitfähig“ (Oberflächenwiderstand zwischen 100 Ω und 100 kΩ) bzw. „statisch ableitfähig“ (Oberflächenwiderstand zwischen 100 kΩ und 100 GΩ).

 

Cerrar filtros
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
Für die Filterung wurden keine Ergebnisse gefunden!
Insert EK 5 PEE for HSMK + WSMK, for rail 5 mm,...
Art.-Nr.: 309002-E
Adecuado para fabricantes: ETN
Insert EK 5 PEE for HSMK + WSMK, for rail 5 mm, 100 x 20 x 30 mm, ETN-HM-1000-E, surface resistivity 10^7 Ohm (DIN IEC 60093) The friction of moving parts may cause big differences of potential. Arising voltage punctures might lead to an...
Inserto EK 6 PEE, para HSMK + WSMK, raíl 6 mm,...
Art.-Nr.: 309048-E
Adecuado para fabricantes: ETN
Insert EK 6 PEE, for HSMK + WSMK, for rail 6 mm, 100 x 20 x 30 mm, ETN-HM-1000-E, surface resistivity 10^7 Ohm (DIN IEC 60093) The friction of moving parts may cause big differences of potential. Arising voltage punctures might lead to...
Insert EM 5 PEE for HSM + WSM, for rail 5 mm,...
Art.-Nr.: 309000-E
Adecuado para fabricantes: ETN
Insert EM 5 PEE for HSM + WSM, for rail 5 mm, 140 x 29,5 x 30 mm, ETN-HM-1000-E, surface resistivity 10^7 Ohm (DIN IEC 60093). The friction of moving parts may cause big differences of potential. Arising voltage punctures might lead to...
Insert EM 9 PEE for HSM + WSM, for rails 10 mm,...
Art.-Nr.: 309007-E
Adecuado para fabricantes: ETN
Insert EM 9 PEE for HSM + WSM, for rails 10 mm, 140 x 29,5 x 30 mm, ETN-HM-1000-E, surface resistivity 10^7 W (DIN IEC 60093). The friction of moving parts may cause big differences of potential. Arising voltage punctures might lead to...
Insert EM 10 PEE for HSM + WSM, for rails 10...
Art.-Nr.: 309006-E
Adecuado para fabricantes: ETN
Insert EM 10 PEE for HSM + WSM, for rails 10 mm, 140 x 29,5 x 30 mm, ETN-HM-1000-E, surface resistivity 10^7 W (DIN IEC 60093). The friction of moving parts may cause big differences of potential. Arising voltage punctures might lead to...
Inserto EK 16 PEE, para HSMK + WSMK, raíl 16...
Art.-Nr.: 309012-E
Adecuado para fabricantes: ETN
Insert EM 16 PEE for HSM + WSM, for rail 16 mm, 140 x 29,5 x 30 mm, ETN-HM-1000-E, surface resistivity 10^7 W (DIN IEC 60093) The friction of moving parts may cause big differences of potential. Arising voltage punctures might lead to an...
Insert EL 16 PEE for guide holder HSML + WSML,...
Art.-Nr.: 309014-E
Adecuado para fabricantes: ETN
Insert EL 16 PEE for guide holder HSML + WSML, rail width 16mm, 180 x 36,5 x 50 mm,, foldable, ETN-HM-1000-E, surface resistivity 10^7 W (DIN IEC 60093). The friction of moving parts may cause big differences of potential. Arising...
Insert ELN 16 PEE for HSMLN + WSMLN, for rail...
Art.-Nr.: 309216-E
Adecuado para fabricantes: ETN
Insert ELN 16 PEE for HSMLN + WSMLN, for rail 16 mm, 180 x 29,5 x 30 mm, ETN-HM-1000-E, surface resistivity 10^7 W (DIN IEC 60093). The friction of moving parts may cause big differences of potential. Arising voltage punctures might lead...
Insert ELN 19 PEE for HSMLN + WSMLN, for rail...
Art.-Nr.: 309217-E
Adecuado para fabricantes: ETN
Insert ELN 19 PEE for HSMLN + WSMLN, for rail 19 mm, 180 x 29,5 x 30 mm, ETN-HM-1000-E, surface resistivity 10^7 W (DIN IEC 60093). The friction of moving parts may cause big differences of potential. Arising voltage punctures might lead...
Insert EEL 16 PEE for HSMEL + WSMEL, for rail...
Art.-Nr.: 313007-E
Adecuado para fabricantes: ETN
Insert EEL 16 PEE for HSMEL + WSMEL, for rail 16 mm, 300 x 36,5 x 30 mm, ETN-HM-1000-E, surface resistivity 10^7 W (DIN IEC 60093). The friction of moving parts may cause big differences of potential. Arising voltage punctures might lead...
Insert EEL 19 PEE for HSMEL + WSMEL, for rail...
Art.-Nr.: 313008-E
Adecuado para fabricantes: ETN
Insert EEL 19 PEE for HSMEL + WSMEL, for rail 19 mm, 300 x 36,5 x 30 mm, ETN-HM-1000-E, surface resistivity 10^7 W (DIN IEC 60093). The friction of moving parts may cause big differences of potential. Arising voltage punctures might lead...
Insert EEL 28 PEE for HSMEL + WSMEL, for rail...
Art.-Nr.: 313009-E
Adecuado para fabricantes: ETN
Insert EEL 28 PEE for HSMEL + WSMEL, for rail 28 mm, 300 x 36,5 x 30 mm, ETN-HM-1000-E, surface resistivity 10^7 W (DIN IEC 60093). The friction of moving parts may cause big differences of potential. Arising voltage punctures might lead...