Insert EK 6 PEE, for HSMK + WSMK, for rail 6 mm, 100 x 20 x 30 mm, ETN-HM-1000-E, surface resistivity 10^7 Ohm (DIN IEC 60093) The friction of moving parts may cause big differences of potential. Arising voltage punctures might lead to an ignition of flammable substances. This could cause serious consequences in explosion-proof areas (e.g. chemical, mining, paint industry). To protect against electrostatic discharges (ESD), rapid discharges should be avoided. Below listed materials are conform to the protection category „conductive“ (surface resistance between 100 Ohm and 100 kOhm) and „static dissipating“ (surface resistance between 100 kOhm and 100 GOhm). Guide inserts out of ETN®-HM -1000-E have antistatic agents and are characterized by a special surface resistance of about 107 Ohm (DIN IEC 60093). Therefore the material is electrically conductive and does not pick up static charging.

309048-E
Art.-Nr.: 309048-E

Insert EK 6 PEE, for HSMK + WSMK, for rail 6 mm, 100 x 20 x 30 mm, ETN-HM-1000-E, surface resistivity 10^7 Ohm (DIN IEC 60093) The friction of moving parts may cause big differences of potential. Arising voltage punctures might lead to an ignition of flammable substances. This could cause serious consequences in explosion-proof areas (e.g. chemical, mining, paint industry). To protect against electrostatic discharges (ESD), rapid discharges should be avoided. Below listed materials are conform to the protection category „conductive“ (surface resistance between 100 Ohm and 100 kOhm) and „static dissipating“ (surface resistance between 100 kOhm and 100 GOhm). Guide inserts out of ETN®-HM -1000-E have antistatic agents and are characterized by a special surface resistance of about 107 Ohm (DIN IEC 60093). Therefore the material is electrically conductive and does not pick up static charging.

  • 309048-E in stock!
    • Technical data

      Identical manufacturer: ETN
      Material: PEE (Polyethylene ETN®-HM-1000-E) discharge
      Guide holder insert - width: 20 mm
      Guide holder insert - height: 30 mm
      Guide holder - length: 100 mm
      Suitable for guide holder: HSMK 100 (Art.-Nr.: 300008)
      WSMK 100 (Art.-Nr.: 300001)
      Rail width: 6 mm
    Insert EK 6 PEE, for HSMK + WSMK, for rail 6 mm, 100 x 20 x 30 mm, ETN-HM-1000-E, surface... more
    "Insert EK 6 PEE, for HSMK + WSMK, for rail 6 mm, 100 x 20 x 30 mm, ETN-HM-1000-E, surface resistivity 10^7 Ohm (DIN IEC 60093) The friction of moving parts may cause big differences of potential. Arising voltage punctures might lead to an ignition of flammable substances. This could cause serious consequences in explosion-proof areas (e.g. chemical, mining, paint industry). To protect against electrostatic discharges (ESD), rapid discharges should be avoided. Below listed materials are conform to the protection category „conductive“ (surface resistance between 100 Ohm and 100 kOhm) and „static dissipating“ (surface resistance between 100 kOhm and 100 GOhm). Guide inserts out of ETN®-HM -1000-E have antistatic agents and are characterized by a special surface resistance of about 107 Ohm (DIN IEC 60093). Therefore the material is electrically conductive and does not pick up static charging."

    Insert EK 6 PEE, for HSMK + WSMK, for rail 6 mm, 100 x 20 x 30 mm, ETN-HM-1000-E, surface resistivity 10^7 Ohm (DIN IEC 60093)

    The friction of moving parts may cause big differences of potential. Arising voltage punctures might lead to an ignition of flammable substances. This could cause serious consequences in explosion-proof areas (e.g. chemical, mining, paint industry). To protect against electrostatic discharges (ESD), rapid discharges should be avoided. Below listed materials are conform to the protection category „conductive“ (surface resistance between 100 Ohm and 100 kOhm) and
    „static dissipating“ (surface resistance between 100 kOhm and 100 GOhm).

    Guide inserts out of ETN®-HM -1000-E have antistatic agents
    and are characterized by a special surface resistance of
    about 107 Ohm (DIN IEC 60093). Therefore the material is electrically
    conductive and does not pick up static charging.

    TOP!
    Guide holder WSMK 100, for inserts EK 5 - 16...
    Art.-Nr.: 300001
    Suitable for manufacturer: ETN
    TOP!
    Guide holder HSMK 100, for inserts EK 5 - 16...
    Art.-Nr.: 300008
    Suitable for manufacturer: ETN