Roller guide for counter weight / yoke guide
Roller guide for counter weight / yoke guide
Our roller guides GG and FK have been developed for counterweights and yoga guides as well as rope and hydraulic lifts. The roller block of a high-strength light metal alloy or steel. All wheels have overrun Vulkollan® tread and branded ball bearings (INA, SKF, etc.). The standard hardnesses are 93 ° and 80 ° shore A. Depending on requirements, the roller coverings can thus be delivered with a hardness of 65 ° and 96 ° Shore A. Vulkollan® has a low rolling resistance, is quiet and vibration-damping, Has the lowest setting behavior of all heavy-duty elastomers and excellent wear resistance. It is resistant to fats and oils. The rollers are infinitely adjustable via slotted holes with a sliding guide. In contrast to eccentric alignment, the front rollers are thus always parallel to each other and can not be crushed. A permanent deformation of the roller lining (plates), a restless running and tension in the roller block are thus prevented. The front scooter is adjusted via the slots in the scooter block. The pitches for the attachment are chosen so that they can easily be exchanged with sliding guides WSMK, WSM, WSMKL and WSML. The guides are delivered pre-assembled. The mounting holes are chosen to be WSMK, WSM, WSMKL and WSML. All rollers of the FK guides are equipped with 2 ball bearings to ensure excellent concentricity in interaction with the over-rotated roller covering. Special versions for higher loads are possible at any time.
Our roller guides GG and FK have been developed for counterweights and yoga guides as well as rope and hydraulic lifts. The roller block of a high-strength light metal alloy or steel. All wheels have overrun Vulkollan® tread and branded ball bearings (INA, SKF, etc.). The standard hardnesses are 93 ° and 80 ° shore A. Depending on requirements, the roller coverings can thus be delivered with a hardness of 65 ° and 96 ° Shore A. Vulkollan® has a low rolling resistance, is quiet and vibration-damping, Has the lowest setting behavior of all heavy-duty elastomers and excellent wear resistance. It is resistant to fats and oils. The rollers are infinitely adjustable via slotted holes with a sliding guide. In contrast to eccentric alignment, the front rollers are thus always parallel to each other and can not be crushed. A permanent deformation of the roller lining (plates), a restless running and tension in the roller block are thus prevented. The front scooter is adjusted via the slots in the scooter block. The pitches for the attachment are chosen so that they can easily be exchanged with sliding guides WSMK, WSM, WSMKL and WSML. The guides are delivered pre-assembled. The mounting holes are chosen to be WSMK, WSM, WSMKL and WSML. All rollers of the FK guides are equipped with 2 ball bearings to ensure excellent concentricity in interaction with the over-rotated roller covering. Special versions for higher loads are possible at any time.