Lexicon: I
Insert-PEPU
Insert-PEPU
A PEPU insert unit provides complete isolation between the guide holder and the rail as well as the PECU variant. In the case of the PECU unit, a Cell-VU intermediate layer takes over the cushioning, in the case of the PEPU it is a homogenous polyurethane. The difference between the two is that the measured sound values in the range of approx. 30 - 60 Hz are more favorable for the hardening homogeneous intermediate layer than for the variant PECU with the Cell-VU intermediate layer Although the homogeneous intermediate layer is also an elastic material, but it is very mobile, it can not react with uneven bumps and bumps like the Cell intermediate layer in the PEPU sliding unit. Cell-VU is a material of max. Can deform load by 90% and has no return loss when unloaded. Homogeneous PU has only a low deformability By design, both versions are oil and aging resistant. The corresponding holding shoe for PEPU is either an HSM or WSM. All existing inserts can be exchanged for PECU sliding guide units if required.This guide unit has the advantage over similar competitive parts that the inserts are captive by the isolated knobs. Noise measurements by a reputed testing company have shown excellent values in terms of noise reduction in the frequency domain as mentioned above. Already well-known companies have recognized the advantage and use our parts.
A PEPU insert unit provides complete isolation between the guide holder and the rail as well as the PECU variant. In the case of the PECU unit, a Cell-VU intermediate layer takes over the cushioning, in the case of the PEPU it is a homogenous polyurethane. The difference between the two is that the measured sound values in the range of approx. 30 - 60 Hz are more favorable for the hardening homogeneous intermediate layer than for the variant PECU with the Cell-VU intermediate layer Although the homogeneous intermediate layer is also an elastic material, but it is very mobile, it can not react with uneven bumps and bumps like the Cell intermediate layer in the PEPU sliding unit. Cell-VU is a material of max. Can deform load by 90% and has no return loss when unloaded. Homogeneous PU has only a low deformability By design, both versions are oil and aging resistant. The corresponding holding shoe for PEPU is either an HSM or WSM. All existing inserts can be exchanged for PECU sliding guide units if required.This guide unit has the advantage over similar competitive parts that the inserts are captive by the isolated knobs. Noise measurements by a reputed testing company have shown excellent values in terms of noise reduction in the frequency domain as mentioned above. Already well-known companies have recognized the advantage and use our parts.