EX-ProdukteETN® Autor Markus Weber erklärt uns die Besonderheiten unserer EX-geschützen Produkte für den Aufzug/Fahrstuhl Bereich. Wo sollte man Explosionsge...

Guide holder HSMK 100, for inserts EK 5 - 16 mm, 100 x 75 x 35 mm

Item number: 300008

Guide holder WSMK 100, for inserts EK 5 - 16 mm, 100 x 75 x 90 mm

Item number: 300001

Insert EK 6 PEE, for HSMK + WSMK, for rail 6 mm, 100 x 20 x 30 mm, ETN-HM-1000-E, surface resistivity 10^7 Ohm (DIN IEC 60093) The friction of moving parts may cause big differences of potential...

Item number: 309048-E

Available immediately

Technical data

Identical in construction to the manufacturer:	ETN
Insert width:	20 mm
Insole height:	30 mm
Insole length:	100 mm
Material:	PEE (Polyethylene ETN®-HM-1000-E) discharge
Rail width:	6 mm
Suitable for holding shoes:	HSMK 100 (Art.-Nr.: 300008), WSMK 100 (Art.-Nr.: 300001)

Description

Insert EK 6 PEE, for HSMK + WSMK, for rail 6 mm, 100 x 20 x 30 mm, ETN-HM-1000-E, surface resistivity 10^7 Ohm (DIN IEC 60093)

The friction of moving parts may cause big differences of potential. Arising voltage punctures might lead to an ignition of flammable substances. This could cause serious consequences in explosion-proof areas (e.g. chemical, mining, paint industry). To protect against electrostatic discharges (ESD), rapid discharges should be avoided. Below listed materials are conform to the protection category „conductive“ (surface resistance between 100 Ohm and 100 kOhm) and
„static dissipating“ (surface resistance between 100 kOhm and 100 GOhm).

Guide inserts out of ETN®-HM -1000-E have antistatic agents
and are characterized by a special surface resistance of
about 107 Ohm (DIN IEC 60093). Therefore the material is electrically
conductive and does not pick up static charging.

Technical data

Identical in construction to the manufacturer:	ETN
Insert width:	20 mm
Insole height:	30 mm
Insole length:	100 mm
Material:	PEE (Polyethylene ETN®-HM-1000-E) discharge
Rail width:	6 mm
Suitable for holding shoes:	HSMK 100 (Art.-Nr.: 300008), WSMK 100 (Art.-Nr.: 300001)

Guide holder HSMK 100, for inserts EK 5 - 16 mm, 100 x 75 x 35 mm

Item number: 300008

Guide holder WSMK 100, for inserts EK 5 - 16 mm, 100 x 75 x 90 mm

Item number: 300001