Sliding guides
Sliding guides are connections between rail and car / counterweight. A sliding guide is crucial for the ride comfort of your system. Here you will find a suitable sliding guide for every situation. If you are unsure which combination of holding shoe and insert might be the right one for your case, please contact us.
Filter
Products on this page: 24
Guide shoe PE 75 x 75 x 25 mm, ETN-HM 1000, for rail 5, 8 , 9 and 16 mm, 4 holes ø 15/8 mm,
1 hole ø 15,5 mm in the middle, incl. cylinder head screws M8 DIN-EN-ISO 4762
Suitable for manufacturer: Oildinamic
Item number:
314068
Guide PE 70 x 25 x 17 mm, ETN-HM 1000, with 2 x holes ø 16/8mm
Suitable for manufacturer: Oildinamic
Item number:
309642
Guide shoe, round, out of ETN-HM 1000, ø 83 x 20 mm
Suitable for manufacturer: ETN
Item number:
314015-B
Insert EMU 10 PE, with 4 bore-holes, for rail 10 mm, 146 x 26 x 29 mm, ETN-HM-1000
Suitable for manufacturer: Schindler
Item number:
309327
Right angle wedge for guide holder HSMEL 300, with fixing points of groundplate as WSMEL 300, primed, 300 x 260 x 198 mm
Suitable for manufacturer: ETN
Item number:
301541
Guide plate ETN-HM1000, 150 x 70 x 8 mm, 4 holes ø12 mm, gap r-55 mm
Suitable for manufacturer: Otis
Item number:
580408
Inserts 14 PA, for rail 14 mm, 70 x 52 x 46 mm, Set á 3 pieces
Suitable for manufacturer: Elastogran / BASF
Item number:
307043
Insert I7 / BFK30 PA-PU, injected PA + ETN ADD insert incl. TPU damping
Suitable for manufacturer: Schindler
Item number:
309415
Insert EMU 14 PE, with 4 bore-holes, for rail 14 mm, 146 x 29 x 26 mm, ETN-HM-1000
Suitable for manufacturer: Schindler
Item number:
309610
Insert 8 PE, U-Profil with bund, for rail 8 mm, 150/130 x 30/20 x 43/32 mm, ETN-HM-1000
Suitable for manufacturer: Centoducati
Item number:
309472-A
Guide 145 x 58 x 11 mm, ETN-HM-1000, 4 x holes ø 7,5 mm
Suitable for manufacturer: ETN
Item number:
309559
Unit HSMS-EKS 9 PEC, HSMS with insert EKS 9 PEC
Suitable for manufacturer: Schindler
Item number:
310024
Unit HSMS-EKS 10 PEC, HSMS, with insert EKS 10 PEC
Suitable for manufacturer: Schindler
Item number:
310025
Unit HSMS-EKS 16 PEC, HSMS with insert EKS 16 PEC
Suitable for manufacturer: Schindler
Item number:
310026
Guide shoe 75 x 29 x 29 mm, ETN-HM 1000, for rail width 5 mm, 2 holes ø 9 mm
Suitable for manufacturer: Oildinamic
Item number:
314067
Insert 9 PE, for rail 9 mm, 100/90 x 37/27,8 x 30 mm, ETN-HM-1000
Suitable for manufacturer: Otis
Item number:
309832
Insert 16 PE, 151/138,5 x 30 x 30 mm, with bund, for 16 mm rail
Suitable for manufacturer: Kleemann
Item number:
309634
Guide holder VU 93°, for guide rail width 9 mm, oval, 100 x 65 x 38 mm
Suitable for manufacturer: ETN
Item number:
301560
Insert PE with cone 120 x 16 x 5,0 mm, cone ø 14 mm, ETN-HM 1000, variation I
Suitable for manufacturer: Otis
Item number:
309522
Insert PE with cone, 120 x 25 x 5,0 mm, cone ø 14 mm, ETN-HM 1000
Suitable for manufacturer: Otis
Item number:
309521
Insert 9 PE, for rail 9 mm, 80 x 24 x 25 mm, ETN-HM-1000, with 2 fastening screws out of brass including lock washer
Suitable for manufacturer: KONE / Bauer / H&S
Item number:
309633
Insert 5 PE, for rail 5 mm, 80 x 24 x 25 mm, ETN-HM-1000, with 2 fastening screws out of brass including lock washer
Suitable for manufacturer: KONE / Bauer / H&S
Item number:
309632
Insert I7 / BFK16 PEC, for rail 16 mm, 65 x 23 x 26,5 mm, ETN-HM-1000, incl. cell
Suitable for manufacturer: Schindler
Item number:
309416
Sliding guide 10 PE, 100 x 65 x 20 mm, rail 10 mm, ETN-HM-1000
Suitable for manufacturer: Schindler
Item number:
309490-A